LTMR100PBD – Motor Management, TeSys T, motor controller, Profibus DP, 6 logic inputs, 3 relay logic outputs, 5 to 100A, 24VDC | Schneider Electric

LTMR100PBD — Motor Management, TeSys T, motor controller, Profibus DP, 6 logic inputs, 3 relay logic outputs, 5 to 100A, 24VDC, an electronic motor protection by Schneider Electric. Listed under Electronic Motor Protection on the Schneider Electric catalogue at RMS-SE.Africa.

About LTMR100PBD

TeSys T is a motor management system that provides full motor monitoring, control, and protection when used with short circuit protection and a contactor. TeSys T manages most critical processes while reducing downtime and increasing productivity. TeSys T is a flexible system that integrates seamlessly into your automation system through five major communication protocols. TeSys T predicts what will happen in the process, as it accurately monitors current, voltage, and power over a wide range. This controller is the central component in the motor management system. The module manages the basic functions of the motor management system. It manages the measurement of 3 phase current via integral current transformers from 0.4 to 100 A or up to 810 A by external current transformers. It also measures ground current with internal or external ground sensors, motor temperature and the inputs and outputs for the various motor control modes, detected fault management and other functions. Profibus DP protocol is used by this controller. This module has 6 discrete logic inputs, 3 relay logic outputs and a relay output for detected fault signaling overload relay. The current range of this controller is 5 to 100 amperes. 24 VDC is used to power this controller. Controller is 2.40 inches tall, 3.58 inches wide and 4.82 inches deep. Controller weighs 1.17 lbs.

LTMR100PBD key specifications

Key specifications: rated current 100 A; rated voltage 24 V.

Ordering information for LTMR100PBD

• Order code: LTMR100PBD
• Manufacturer: Schneider Electric (formerly Telemecanique)
• Range: TeSys T
• GTIN / EAN: 3389119404846
• Supplied: each
• Weight: 0.522 kg
• ETIM class: EC002572
• Datasheet: manufacturer datasheet for LTMR100PBD

About the TeSys T range

TeSys T is a Schneider Electric range with 28 references listed on RMS-SE.Africa, from 8 A to 100 A. It spans Electronic Motor Protection, Soft Starters.

LTMR100PBD — frequently asked questions

What is the rated current of LTMR100PBD?

LTMR100PBD is rated 100 A.

Where is the datasheet for LTMR100PBD?

The manufacturer datasheet is linked under “Ordering information” above; the product page also carries the manufacturer’s documents where Schneider Electric publishes them.

Is LTMR100PBD a genuine Schneider Electric product?

Yes. LTMR100PBD is supplied through the manufacturer’s authorised channel with the standard Schneider Electric warranty, and every order is confirmed against stock before payment.